Note: all the code, scripts, etc. are archived in a git repo at GitHub.

Diving In

As a refresher from the Types of Virtualization post, type-2 hypervisors are virtualization systems in which a Host OS sits between the Guest OS and the hardware. Sometimes, especially when the Guest OSes instruction set differs from the Host OSes instruction set, this type of hypervisors are called emulators. In this context, this type of hypervisor is well-suited for embedded systems development and test. For this deep dive, I will be focusing on the emulation side of type-2 hypervisors. (The other side of type-2 hypervisors are more like VirtualBox and are not particularly useful for embedded systems development).

QEMU as a Development Platform

QEMU is an open-source emulator which has broad community support and contains libraries for emulating a large number of targets of many different instruction sets and peripherals. This makes it a particularly useful tool for developing code for a target for which you don’t have real hardware.

Setting up a QEMU Target

Luckily, QEMU has prebuilt packages for most platforms you can simply install using the package manager of your choice. I’m going to be targeting the aarch64 (also referred to as arm64 in Linux land) architecture for emulating a virtual platform similar to the Raspberry Pi 3 (and newer). I have installed the package on my Linux Mint machine which provides qemu-system-aarch64. With this emulator available, I can invoke the emulator with the following command:

qemu-system-aarch64 -m virt -M 1G -kernel kernel.elf

This command will start up an ARMv8-A-based virtual machine, with 1GB of RAM, and load the code in kernel.elf.

The post Virtualization for Embedded Systems Series: Type-2 Hypervisors Deep Dive appeared first on Jacob N Calvert.

Note: all the code, Dockerfiles, etc. are archived in a git repo at GitHub.

Container History

Origins

A little history is needed before we jump into building and deploying containers. Docker, which is likely still the largest container technology provider by a longshot, was originally released in 2013. In just 6 years a huge community using containers sprang up around the concept – check out DockerHub for a sense of scale in the community. Preceding the Docker phenomenon, we had LXC (Linux Containers) which had been around since around 2008, but it really never had the sticking power that Docker has enjoyed. Fast-forward to today, and there are a handful of competing container technologies, all with similar features, but some have better ecosystems or support than others.

Where We Are Today

Recently there has a push for a standardization of the container frameworks that makeup these ecosystems. The Open Container Initiative is an open governance body for working towards standardization of the container framework. Many container systems have already adopted this and become OCI compliant or aligned. Docker has also bolstered the community by donating much of its container infrastructure components to the open source world for OCI to utilize.

Goal of the Open Container Initiative

I encourage you to go to the OCI’s website and read their mission documents in whole, but I’d like to provide the brief description here as it relates to our use of containers in embedded systems. The OCI intends to create a standard for representing containers and their basic runtime requirements and interfaces for portability. From their FAQs:

The mission of the Open Container Initiative (OCI) is to promote a set of common, minimal, open standards and specifications around container technology.

What is the mission of the OCI? FAQ (https://www.opencontainers.org/faq#faq1)

This is important to us in embedded engineering because we need this portability and compatibility to fully realize the use cases outlined in the last post. Since the OCI has not reached a sufficiently mature status, I will be sticking with Docker as the container ecosystem in this post.

Docker Containers: A Hands-On Example

Objectives

In the following sections we will accomplish the following:

1. Create a basic container image from a Dockerfile
2. Create a container to build and test a custom application
3. Create a container to host the custom application
4. Export the container
5. Run the container on a different platform

Creating a Basic Container

I’m starting with the assumption that Docker is installed and you’ve been able to run the Docker hello-world image. We will use a Dockerfile to compose our basic image. A Dockerfile is a script of sorts which instructs the engine to construct our container piece by piece. I’ve put a (very) basic Dockerfile below.

##########################################
# File: Dockerfile
# Author: Jacob Calvert <jcalvert@jacobncalvert.com>
# Date: Nov-08-2019
# 
# This is a basic Dockerfile 
#
##########################################

# start from the basic busybox image
FROM busybox

# put a file in our container
COPY hello-world.txt .

What I have in my workspace on my host machine is as follows:

jacob@jacob-aspire-mint /workspace/virtualization-for-embedded-systems-series/containers-deep-dive/basic $ ls
Dockerfile  hello-world.txt
jacob@jacob-aspire-mint /workspace/virtualization-for-embedded-systems-series/containers-deep-dive/basic $ cat hello-world.txt
hello, world!

To build the Docker image from the Dockerfile, you run a ‘docker build’ command. The ‘-t’ specifies a tag by which we’ll reference this image, and the ‘.’ specifies the directory for the Dockerfile – in this case, the current directory.

jacob@jacob-aspire-mint /workspace/virtualization-for-embedded-systems-series/containers-deep-dive/basic $ docker build -t basic .
Sending build context to Docker daemon  3.072kB
Step 1/2 : FROM busybox
 ---> 020584afccce
Step 2/2 : COPY hello-world.txt .
 ---> 11e3eeda8f8e
Successfully built 11e3eeda8f8e
Successfully tagged basic:latest
jacob@jacob-aspire-mint /workspace/virtualization-for-embedded-systems-series/containers-deep-dive/basic $ 

Let’s view and run our image now.

jacob@jacob-aspire-mint /workspace/virtualization-for-embedded-systems-series/containers-deep-dive/basic $ docker image ls
REPOSITORY                        TAG                 IMAGE ID            CREATED             SIZE
basic                             latest              11e3eeda8f8e        42 seconds ago      1.22MB
ubuntu                            latest              775349758637        8 days ago          64.2MB
busybox                           latest              020584afccce        9 days ago          1.22MB
hello-world                       latest              f2a91732366c        23 months ago       1.85kB
quantumobject/docker-zoneminder   latest              469615ab191d        24 months ago       1.15GB
mysql/mysql-server                latest              a3ee341faefb        2 years ago         246MB
jacob@jacob-aspire-mint /workspace/virtualization-for-embedded-systems-series/containers-deep-dive/basic $ docker run -it basic
/ # ls
bin              dev              etc              hello-world.txt  home             proc             root             sys              tmp              usr              var
/ # cat hello-world.txt 
hello, world!
/ # exit
jacob@jacob-aspire-mint /workspace/virtualization-for-embedded-systems-series/containers-deep-dive/basic $ 

What are we looking at here? First we list our available local images with the docker image ls command. We can see that I have several images on my development machine, including basic which was created only a few moments ago from our build command. Next I run the image we created with docker run -it <image>. The -it flags are for –interactive and –tty. These two together essentially present the container’s console as a pseudo-tty device in your terminal, in interactive mode. It is as if you are sitting in front of another machine.

Next, you can see that I have a different prompt. This is the container’s prompt. I type ls and we can see our hello-world.txt is there on the filesystem of our container as we desired via the COPY command in the Dockerfile. Lastly, we type exit which ends the busybox process and exits the container.

Now let’s look at the persistent state parts of Docker.

jacob@jacob-aspire-mint /workspace/virtualization-for-embedded-systems-series/containers-deep-dive/basic $ docker system info
Client:
 Debug Mode: false

Server:
 Containers: 1
  Running: 0
  Paused: 0
  Stopped: 1
 Images: 6
 Server Version: 19.03.2
 Storage Driver: overlay2
  Backing Filesystem: extfs
  Supports d_type: true
  Native Overlay Diff: true
 Logging Driver: json-file
 Cgroup Driver: cgroupfs
 Plugins:
  Volume: local
  Network: bridge host ipvlan macvlan null overlay
  Log: awslogs fluentd gcplogs gelf journald json-file local logentries splunk syslog
 Swarm: inactive
 Runtimes: runc
 Default Runtime: runc
 Init Binary: docker-init
 containerd version: 894b81a4b802e4eb2a91d1ce216b8817763c29fb
 runc version: 425e105d5a03fabd737a126ad93d62a9eeede87f
 init version: fec3683
 Security Options:
  apparmor
  seccomp
   Profile: default
 Kernel Version: 4.4.0-165-generic
 Operating System: Linux Mint 18
 OSType: linux
 Architecture: x86_64
 CPUs: 4
 Total Memory: 15.55GiB
 Name: jacob-aspire-mint
 ID: Z2GE:5Y2A:K4LP:UC4O:QV3A:4JMR:5RLW:2DHQ:WANN:2RA3:VKJ2:UZMI
 Docker Root Dir: /var/lib/docker
 Debug Mode: false
 Registry: https://index.docker.io/v1/
 Labels:
 Experimental: false
 Insecure Registries:
  127.0.0.0/8
 Live Restore Enabled: false

Using docker system info we can see that there is 1 container and that it is stopped (not running). How do we see what that container is?

jacob@jacob-aspire-mint /workspace/virtualization-for-embedded-systems-series/containers-deep-dive/basic $ docker ps -a
CONTAINER ID        IMAGE               COMMAND             CREATED             STATUS                     PORTS               NAMES
c76e0de1a530        basic               "sh"                4 minutes ago       Exited (0) 3 minutes ago                       silly_kalam

We can use the ps command to see information about our containers. Notice the STATUS column. Our container’s execution has exited. This begs the question: can we restart a container and pick up where we left off? The answer of course is yes!

jacob@jacob-aspire-mint /media/jacob/jacob/Documents/Workspaces/Blog/virtualization-for-embedded-systems-series/containers-deep-dive/basic $ docker container start -i silly_kalam 
/ # ls
bin              dev              etc              hello-world.txt  home             proc             root             sys              tmp              usr              var
/ # 

Notice the command difference this time around. I am using docker container start -i <name> where the name is a name given to the container at run time. The container can be referenced by its human-friendly name as I have done here, or by its ID (the long UUID). Also note the -i flag; this is to open it as an interactive session again. No -t is needed since the TTY device has already been allocated. So can we work inside this running container like a real machine and see the state persist? Indeed we can as well! Let’s see it in action.

/ # cd home/
/home # mkdir -p user/workspace/
/home # cd user/workspace/
/home/user/workspace # echo "another file!" > another.file
/home/user/workspace # ls
another.file
/home/user/workspace # exit

jacob@jacob-aspire-mint /workspace/virtualization-for-embedded-systems-series/containers-deep-dive/basic $ docker container start -i silly_kalam 

/ # ls
bin              dev              etc              hello-world.txt  home             proc             root             sys              tmp              usr              var
/ # cd home/user/workspace/
/home/user/workspace # ls
another.file
/home/user/workspace # cat another.file 
another file!
/home/user/workspace # 

It may be a little hard to follow, but here’s what has happened. From inside our previously started container named silly_kalam, I have created a directory /home/user/workspace. Next, I created a file named another.file and filled it with “another file!”. I then exited the container. Next, I started the container again, changed directory to my created directory, and printed out the contents of another.file.

Using this example we can see that the content inside a container is not purely ephemeral, but can persist over many starts/stops. For more persistent storage check out Docker’s Volume subsystem.

Creating a Development Environment Container

Using the knowledge gained through building a basic container, we will now create a container to use as a development environment for our example application.

The Application Specs

We want to build a simple application which demonstrates the portability of containers and also does something we can test. We also want it to be a simple application for demo purposes. With this in mind, our application will be a simple data modem. It will take in data from one source medium and spit it out as another medium. Below is a list of basic requirements codified for this application:

• Translate data from a serial device to UDP
  • Serial will be at 115200/8N1 configuration
  • UDP will listen on a configurable port
  • TTY device will be configurable
• Modem will log messages to container console

To satisfy these requirements we need to be able to build application code for the container. Why use a container to build applications? Why not just use your host machine’s development environment? Repeatability is the answer. Rather than struggle to maintain a development environment across multiple developers who have their own flavors of Linux distro and preferences and so on, we can distribute a “builder” container which has all the dependencies and tools needed to build the application (albeit a simple one in this case) from scratch and is completely independent of the host it runs on.

Building and Using the Container

For our “builder” container we create the following Dockerfile:

##########################################
# File: Dockerfile
# Author: Jacob Calvert <jcalvert@jacobncalvert.com>
# Date: Nov-09-2019
# 
# This Dockerfile creates a development environment for 
# building a sample application
#
##########################################

# start from the basic ubuntu image
FROM ubuntu

# install the needed tools in our container
RUN apt-get update && apt-get install build-essential git net-tools -y

This Dockerfile starts with an Ubuntu base image, and adds the three common packages build-essential, git, and net-tools. I won’t show the entire build process but at the end you should be able to run the new container as we did in the basic use case.

jacob@jacob-aspire-mint /workspace/virtualization-for-embedded-systems-series/containers-deep-dive/dev-env $ docker run -it dev-env
root@32984d05f73f:/# ifconfig 
eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        inet 172.17.0.2  netmask 255.255.0.0  broadcast 172.17.255.255
        ether 02:42:ac:11:00:02  txqueuelen 0  (Ethernet)
        RX packets 19  bytes 2853 (2.8 KB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
        inet 127.0.0.1  netmask 255.0.0.0
        loop  txqueuelen 1  (Local Loopback)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

root@32984d05f73f:/# gcc
gcc: fatal error: no input files
compilation terminated.
root@32984d05f73f:/# 

Now in another tab let’s copy our source into our builder image (note: we could have simply git cloned it as well, but in many areas I work in, network access is a no-go).

jacob@jacob-aspire-mint /workspace/virtualization-for-embedded-systems-series/containers-deep-dive/dev-env $ docker cp modem.c jovial_rhodes:/

And now we can see this file in our running container.

root@32984d05f73f:/# ls
bin  boot  dev  etc  home  lib  lib64  media  mnt  modem.c  opt  proc  root  run  sbin  srv  sys  tmp  usr  var
root@32984d05f73f:/# 

So let’s build our application, and grab the resulting binary.

root@32984d05f73f:/# gcc modem.c -o modem -lpthread
root@32984d05f73f:/# ls
bin  boot  dev  etc  home  lib  lib64  media  mnt  modem  modem.c  opt  proc  root  run  sbin  srv  sys  tmp  usr  var
root@32984d05f73f:/# 

jacob@jacob-aspire-mint /workspace/virtualization-for-embedded-systems-series/containers-deep-dive/dev-env $ docker cp jovial_rhodes:/modem ./modem
jacob@jacob-aspire-mint /workspace/virtualization-for-embedded-systems-series/containers-deep-dive/dev-env $ ls
Dockerfile  modem  modem.c
jacob@jacob-aspire-mint /workspace/virtualization-for-embedded-systems-series/containers-deep-dive/dev-env $ 

We have successfully used a container to build an image for deployment. The application is a simple one, but it illustrates the point of using a “builder” container for repeatable builds. Now we can move on to deploying our application. Of course there’d be rigorous testing in a real-world application, but we can neglect that for the purposes of demonstration.

Creating a Deployment Environment Container

We want to now create a container which will start our application on boot, and run that application until we exit the container. We will start with our basic Ubuntu, and add a few things as shown below.

##########################################
# File: Dockerfile
# Author: Jacob Calvert <jcalvert@jacobncalvert.com>
# Date: Nov-09-2019
# 
# This Dockerfile creates a deployment environment for 
# the sample application
#
##########################################

# start from the basic ubuntu image
FROM ubuntu

# create a app/bin directory in our container
RUN mkdir -p /app/bin 

# copy in the app and a startup script
COPY modem /app/bin
COPY start-modem.sh /

# set the entry point
ENTRYPOINT /start-modem.sh

Notice a new directive here? The ENTRYPOINT directive is what will be run on startup of the container. Now let’s take a look at the contents of that script.

#!/bin/sh
/app/bin/modem -d $TTY_DEVICE -p $PORT

Simple right? All it does is start our application with some environment variables as parameters.

Testing our Deployment Container

Here’s where the magic of containers will really start to shine.

jacob@jacob-aspire-mint /workspace/virtualization-for-embedded-systems-series/containers-deep-dive/deploy-env $ sudo docker run -it -e TTY_DEVICE=/dev/ttyACM0 -e PORT=9000 --device=/dev/ttyACM0 deploy-env 

This time we will run our container image with a few extra parameters. First, the -e flag will inject key=value pairs as environment variables. That’s how our script will know what those are at run time. Next we pass through the /dev/ttyACM0 device from the host machine to the docker container. If we modify that line to –device=/dev/ttyACM0:<custom container path> we can give the serial device a specific path in the container, otherwise it just gets identity mapped. Docker sets up a default NAT network on the host on the 172.17.0.0/24 subnet, so we will have access to this container at an IP address in that range once we start it. Also, the device hanging on /dev/ttyACM0 is just printing out a sequence for test data every second.

So what’s it look like when it runs? From the container you see:

 
Device selected is '/dev/ttyACM0'
Port base selected is 9000
UDP TX: '3
'
UDP TX: '0
'
UDP TX: '1
'
UDP TX: '2
'
UDP TX: '3
'
UDP TX: '4
'
UDP TX: '5
'
UDP TX: '6
'
UDP RX: 'hello world!
'
UDP TX: '7
'
UDP TX: '8
'
UDP TX: '9
'
UDP TX: '10
'
UDP TX: '11
'
UDP TX: '12
'
UDP TX: '13
'
UDP RX: 'hello virtualization!
'
UDP TX: '14
'
UDP TX: '15
'
UDP TX: '16
'
UDP TX: '17
'
UDP TX: '18
'
UDP TX: '19
'
UDP TX: '20
'
UDP TX: '21
'
UDP TX: '22
'
'DP TX: '23
UDP TX: '
'
UDP TX: '24

And from the netcat (nc) session on my host:

jacob@jacob-aspire-mint /workspace/virtualization-for-embedded-systems-series/containers-deep-dive/dev-env $ nc -u 172.17.0.2 9000
hello world!
hello virtualization!
14
15
16
17
18
19
20
21
22
23
24
^C

I’ve typed the “hello” statements into the netcat session and it is receiving the increment sequence from the serial device via UDP on the remote end. We have successfully created and deployed a containerized application!

Exporting the Containerized Application

Since we now have a complete application all self-contained in a container, we can export this to run on other systems. In Docker, this is as simple as:

docker save -o deployment-environment.tar deploy-env:latest

We now have a TAR archive of all the layers building up our container. This is a portable format you can move around to deploy on different machines by importing it onto another host and running it.

Running the Containerized Application on Another Machine

I used scp to copy my TAR file to another machine and imported it into Docker using:

jacob@dev-ubuntu:~# docker load < deployment-environment.tar 
bd59016c97ec: Loading layer [==================================================>]  2.048kB/2.048kB
8c558935f47c: Loading layer [==================================================>]   16.9kB/16.9kB
0cc408f84946: Loading layer [==================================================>]  2.048kB/2.048kB
Loaded image: deploy-env:latest
jacob@dev-ubuntu:~# docker image ls
REPOSITORY                TAG                 IMAGE ID            CREATED             SIZE
deploy-env                latest              d427611b8747        About an hour ago   64.2MB

Now we can run the app on a different machine just like our original host machine. (I omitted any parameters, I just want to see the modem binary print out errors).

jacob@dev-ubuntu:~# docker run -it deploy-env 
Device selected is '-p'
Failed to open device '-p'

So what’s the point?

So what’s the point? Couldn’t we just copy our modem binary to the other machine and run it in the native host? Sure, for this application, because it has no special dependencies. But imagine if your application depends on QT5, TensorFlow, and a pre-trained Data Model? Making sure all that stuff gets installed on the target host machine is a nightmare. Having a single TAR file with all dependencies built in, with your application properly parameterized ready to launch makes portability and usabilty a much easier sell, especially for embedded systems.

Said another way: if the only requirement to upgrade your application or add additional applications to a fielded embedded system is that you have the right container infrastructure, it is much easier to rapidly update existing capabilities and to deploy new capabilities to the edge with a high confidence of success.

Wrapping Up

In this post, we focused on a practical example of using containers. It’s easy to see how this technology has the ability to be incredibly impactful for embedded systems. In the next post, we will take a look at type-2 hypervisors and how to use them for embedded systems.

I hope you enjoyed the content of this post! If you did, feel free to comment or shoot me a message over at the contact page!

The post Virtualization for Embedded Systems Series: Containers Deep Dive appeared first on Jacob N Calvert.

If you didn’t catch the intro to this series, you can read a little about the motivation for these posts in the previous post.

Types of Virtualization Technology

When considering the delineations between different types of virtualization technology, it helps to draw the line based on where the Virtual Machine (VM) or container touches the hardware. Let’s look at this aspect of virtualization first.

Containerization

Containerization is the application of virtualization to create lightweight, small footprint “services” that sit on top of a host operating system. In the previous post, I linked to Kubernetes which is an orchestration engine (among other things) for containers. Containers are often used to segregate applications or services into their own user space for a multitude of reasons. One of the primary reasons is scalability.

Using an orchestrator like Kubernetes, you can write your applications’ services such that they can dynamically scale up or down to meet demand by spinning up or down containers “in the cloud.” In fact, this is the exact model that many SaaS (software as a service) providers are using to maximize their capabilities on a limited set of hardware resources. Check out Amazon AWS for more details on this model (it’s pretty neat!). This model typically requires the host OS to have support for this container creation and can typically only support containers of the same flavor as the host OS (this is not always true, but there are caveats)^[1]. For example with Docker as your container manager, you can only host Linux containers on a Linux host OS.

At first glance, containerization may not seem like a good fit for embedded systems, but when we explore use cases specifically for embedded devices, we’ll find there are some pretty neat applications of the technology in various industries.

Process Virtual Machines

Process Virtual Machines (PVMs) are very similar to containerization, but instead of presenting a full user space for your application, you’re only allowed one process. Due to the similarities in structure to containers, I’m going to lump these two together.

Type 2 Hypervisors

This type of virtualization is related to containerization in the respect that a host operating system sits between the virtualized application and the hardware. It is also quite a bit different, as there is also an entire guest operating system sitting between your application and the hardware.

This gives you more isolation in some respects, but can also create performance issues. One major benefit of type 2 hypervisors is that you can run mixed varieties of guest OSes independent of your host OS. VirtualBox is a good example of this type of virtualization. Using VirtualBox, I can run a Linux Mint guest and a Windows 7 guest on my Windows 10 host, side-by-side. Another benefit of type 2 hypervisors is that you can also run mixed architectures on the same host platform. For example, using QEMU, I can run a PowerPC-based Linux image on my Intel x86_64 processor. In this mode however, the performance is greatly impacted (although there have been many improvements), and you will not get the same performance as running on the native instruction set of the host OS.

Type 1 Hypervisors

Type 1 hypervisors are the flavor of virtualization which brings the guest OS closest to the hardware, and provides the best performance in a hypervised environment. In this type of virtualization, the hypervisor itself is the host OS, and provides all critical facilities to the guest OS with minimal impact to the guest OSes execution.

Another critical difference here is that the guest OSes must share the same instruction set architecture (ISA). In other words, if your host platform is an ARMv8 cluster, your guest OSes must all run ARMv8 machine code, however, some architectures have support to run 32bit and 64bit side by side on the same chip depending on configuration (we’ll explore this later.)

Other Considerations

With all the types of virtualization technology I’ve listed, there are a few other considerations they have in common which are worth at least noting.

Processor Oversubscription

Processor oversubscription is the concept of assigning more virtual CPU cores to your guest OS machines than you have physical CPU cores on your hardware. Some environments allow you to do this, and it is not a universal feature. It’s also not universally desired for every virtualization solution. Typically, your physical CPU’s cores are not utilized at 100%. Allowing oversubscription so you can make better use of the processing cycles makes sense, but what happens if a malicious application starts hogging all of the cycles on one core? Depending on the virtualization technology and its configuration, the other guest OSes may suffer as a result.

RAM and Storage Oversubscription

This concept is similar to Processor Oversubscription, but applies to the physical RAM and the non-volatile storage in your host hardware. Again, there is a chance that a guest OS will need to use its RAM resource, and because it is oversubscribed it may not be available, leading to processing delays, or at worst, failure. Similarly, perhaps a critical log message needs to be written to a disk, but the storage quota for the disk is already met due to oversubscription – a failure is likely!

Hardware-assisted Hardware Sharing

Sounds redundant doesn’t it? It’s not, I promise! This concept is a hardware-based capability and varies by platform. The basic concept is that a device that multiple guest OSes may want to use (like an Ethernet controller) has some built-in capabilities to help each VM or guest OS use the shared resource, while keeping their data separate. An example of this is SR-IOV. Single Root I/O Virtualization is a technology related to PCIe where PCIe resources can be divvied up for use among several guest OSes. Check out this Microsoft article for more information on SR-IOV.

Wrapping Up

Now that we’ve explored several different flavors of virtualization technology, I’d like to zero in on just the ones that we are likely to use in embedded systems – containers and hypervisors. In the next post, we will walk through some examples of how each of these can be applied to embedded systems, and what benefits they can bring.

References

[1] Docker: Linux Containers on Windows Hosts ( https://www.docker.com/blog/preview-linux-containers-on-windows/ )

The post Virtualization for Embedded Systems Series: Types of Virtualization appeared first on Jacob N Calvert.

In today’s technology driven world, virtualization plays a giant role in our day-to-day life. Services like Amazon AWS and DigitalOcean are ubiquitous as service providers to all sorts of companies. These provide the backbone to our daily browsing and Internet usage habits. Entire ecosystems have been built around this concept as well. Take Kubernetes for example^[2]. Kubernetes is a suite of software designed from the ground up to support deploying, managing, balancing, monitoring and more for distributed containers across dissimilar architectures and platforms. Similarly, VMWare’s vCenter Orchestrator^[3] performs similar functions for fully hypervised guest OSes or Virtual Machine (VMs). Typically we use virtualization to make the best use of hardware resources. This has been particularly beneficial in the realm of web services and cloud computing since the advent of powerful multicore processors backed by massive swathes of RAM. Now that multicore processors are no longer only in the data center, and they have become sufficiently small and efficient enough to be used in embedded systems, is virtualization the next step for embedded devices? Some may say we’re already there (looking at you Android Runtime^[4]). I say that virtualization is only going to become more prevalent in embedded systems as we consolidate more functionality into smaller footprints.

I’m starting this series on Virtualization for Embedded Systems to share my knowledge and explore the state of the art for embedded device virtualization. I’ll be taking a look at how various virtualization mechanisms work, which architectures work well for virtualization, software platforms that make virtualization easy and attainable, and the benefits of going virtualized.

I hope to cover these aspects in three or so articles, so stay tuned!

References

[1] Wikipedia contributors. (2019, September 23). CP/CMS. In Wikipedia, The Free Encyclopedia. Retrieved 16:34, October 31, 2019, from https://en.wikipedia.org/w/index.php?title=CP/CMS&oldid=917270626

[2] Kubernetes.io (2019, October 31). Homepage. Retrieved 18:55, October 31, 2019, from https://kubernetes.io/

[3] blog.vmware.com (2014, June 27). VMware vSphere Blog. Retrieved 19:02, October 31, 2019, from https://blogs.vmware.com/vsphere/2014/06/getting-started-vmware-vcenter-orchestrator-building-many-virtual-machines.html

[4] Wikipedia contributors. (2019, October 2). Android Runtime. In Wikipedia, The Free Encyclopedia. Retrieved 19:59, October 31, 2019, from https://en.wikipedia.org/w/index.php?title=Android_Runtime&oldid=919289272

The post Virtualization for Embedded Systems Series: Introduction appeared first on Jacob N Calvert.