How’s it made?

The guts

This project has the following components:

• 1 wooden cigar box from a hobby shop ($7)
• 1 clone Arduino Mega from Amazon ($9)
• 4 faders and 8 pots from digikey ($18)
• 1 1602A LCD from Amazon ($8)
• 1 rotary knob with pushbutton from Amazon ($3)
• 4 LEDs in different colors (freeee – I have a bunch already)
• 1 SPDT switch from Amazon ($1)
• 1 hot glue gun and hot glue sticks from hobby shop ($15)

Manufacturing

I first drew out a few templates on graph paper of what I wanted the end product to look like. Then I took each variation and taped it to the box’s top and tried to visualize using it in that form factor. Once I had decided on the way it was to be laid out, I went to the shop.
I taped over (with clear tape) where I would cut and drill so the layout template wouldn’t tear off, then I used a drill press to put holes in the right places and the jigsaw to my the slots and the LCD hole.

The Assembly

The first parts I put in were the faders. I used Gorilla Glue to tack them in position, and I let them cure for about 2 days. Then I put in all the other pots, switches, and hot-glued the LCD in place. Finally I put in the LEDs and hot-glued them in place.

Here’s a picture before all the hardware was in:

MIDI Control Surface w/ Some Components

I used solid core wire and high quality solder to build the wiring harness. The last step in assembly was to cut a slot for the USB cable go through the side of the box and wire up the microcontroller.

The uC

I used the Arduino Mega form factor, but did not use the IDE. The code I used was AVR-libc based and was an extension of the littleKernel project I had been working on. I eventually added the optiboot bootloader so I didn’t need to pull the Mega from the box to update the code. I’ll get around to putting the code up eventually (probably).

What does it do?

Here, a feature list makes sense:

• MIDI TX and RX lights
• Power good light
• Debug light (always good to have)
• Reset switch
• 12 control surfaces which can be independently mapped to different MIDI channels and Change Control numbers
• LCD and scroll knob user interface for setting up the aforementioned options
• A settings Save and Recall function using the uC EEPROM
• A settings Dump and Load function using the serial interface

All in all, this was a really fun project. Perhaps I’ll put up a demo of me using it with a DAW…
Anyhow, here are the pics of the final product and an early prototype for reference! Thanks for reading!

The post Presenting…. The MIDI Control Surface (Rev. A) appeared first on Jacob N Calvert.

Introducing littleKernel

As the name implies, it is a little kernel. I’ve built this little multitasking kernel for a project I’ve got in mind down the road. For now though, I’m going to learn as much as I can about multitasking while improving my own littleKernel project.

The project down the road

I love to make music. Whether it be from a physical instrument, digital instrument, or a combination — I love doing it. I’ve built the hardware for a 12 channel MIDI control surface. I built a 4 channel prototype earlier this year, but wanted to do a bigger, more multi-functional version of that. I’ll post pics later on, but this project is the primary reason for home-rolling a multitasking kernel for a microcontroller.
Until next time…

The post I’ve been busy working, but I’ve started a side project appeared first on Jacob N Calvert.